InkWeave™ Reusable A4 Sticky Fabric Printing Backing – For Inkjet Fabric Printing

R39.00

PRINT ON FABRIC WITH YOUR INKJET PRINTER!

REUSABLE 10+ TIMES • NO IRON-ON BACKING REQUIRED • EASY TO USE!

Make printing on fabric at home simple with the InkWeave™ Reusable A4 Sticky Fabric Printing Backing.

This specially prepared A4 backing securely holds your pre-treated cotton or other suitable fabric in place while feeding through your compatible home inkjet printer.

JUST STICK • PRINT • PEEL • REUSE!

  • A4 SIZE – 210 × 297mm
  • REUSABLE – Successfully tested for more than 10 uses
  • STICKY SURFACE – Holds fabric securely during printing
  • NO IRONING TO ATTACH – Simply press your fabric onto the backing
  • REMOVABLE – Carefully peel your printed fabric away after printing
  • PROTECTIVE COVER INCLUDED – Keeps the sticky surface clean between uses

Perfect for printing photographs, artwork, book covers, quilt blocks and personalised designs onto InkWeave™ pre-treated fabric.

PRINT ON FABRIC. WASH IT. KEEP THE PRINT.

Includes 1 × reusable A4 printing backing. Fabric and InkWeave™ pretreatment are sold separately.

InkWeave™ Reusable A4 Sticky Fabric Printing Backing

PRINT ON FABRIC WITH YOUR INKJET PRINTER!

REUSABLE 10+ TIMES • NO IRON-ON BACKING REQUIRED • JUST STICK, PRINT & PEEL!

Printing on fabric at home has never been easier!

The InkWeave™ Reusable A4 Sticky Fabric Printing Backing is specially prepared to hold your fabric securely while printing with a compatible home inkjet printer.

Simply attach your InkWeave™ pre-treated cotton or other suitable fabric to the sticky surface, print your design and carefully peel your finished fabric away.

NO IRON-ON PAPER • NO PERMANENT ADHESIVE • NO COMPLICATED PREPARATION!

Use the same backing again and again to create beautiful personalised fabric prints for quilting, bookbinding, sewing and creative projects.

YOUR FABRIC. YOUR PRINTER. YOUR DESIGNS.

WHY CHOOSE INKWEAVE™ REUSABLE PRINTING BACKING?

REUSABLE 10+ TIMES!

Our reusable backing has been successfully tested for more than 10 uses when handled and cared for correctly.

Instead of preparing a new backing for every print, simply remove your printed fabric, replace the protective cover and store the backing for your next project.

NO IRON-ON BACKING REQUIRED!

There's no need to iron freezer paper or heat-activated backing onto your fabric.

JUST PRESS YOUR FABRIC ONTO THE STICKY SURFACE!

HOLDS FABRIC SECURELY!

The sticky surface keeps your fabric flat and firmly attached while feeding through a compatible inkjet printer.

EASY TO REMOVE!

Once your design has printed and the ink has dried, carefully peel the fabric away from the backing.

A4 SIZE – READY TO USE!

Each backing is cut to 210 × 297mm, making it convenient for preparing A4 fabric printing sheets.

PRINT YOUR OWN DESIGNS!

PRINT ON FABRIC WITH YOUR INKJET PRINTER and create personalised photographs, botanical artwork, fabric book covers, quilt blocks and handmade gifts.

WHAT'S INCLUDED?

  • 1 × A4 REUSABLE STICKY PRINTING BACKING – 210 × 297mm
  • 1 × PROTECTIVE COVER SHEET – Protects the sticky surface between uses
  • PRINTED INSTRUCTIONS – Guidance for attaching fabric, printing and caring for your backing

IMPORTANT: This product is the reusable printing backing only.

FABRIC AND INKWEAVE™ PRETREATMENT ARE NOT INCLUDED.

HOW TO USE YOUR REUSABLE PRINTING BACKING

STEP 1 – REMOVE THE PROTECTIVE COVER

Place your backing on a clean, flat surface with the sticky side facing upwards.

Carefully remove the protective cover sheet.

STEP 2 – START WITH THE LONG EDGE

Align one long edge of your dry, pre-treated fabric with the long edge of the backing.

ALWAYS START WITH ONE LONG EDGE FIRST!

STEP 3 – SMOOTH & PRESS FIRMLY

Gently lower the remaining fabric onto the sticky surface.

Smooth and press firmly across the entire sheet, paying particular attention to the edges and corners.

STEP 4 – CHECK BEFORE PRINTING

Make sure your fabric is completely flat and securely attached.

NO AIR BUBBLES • NO WRINKLES • NO LIFTING EDGES!

Loose fabric or raised areas can catch inside your printer or cause ink smudging.

STEP 5 – PRINT YOUR DESIGN

Feed the prepared fabric sheet through your compatible home inkjet printer.

Print your photograph, illustration, pattern or artwork.

STEP 6 – PEEL & REUSE

Allow the ink to dry thoroughly.

Carefully peel your printed fabric away from the backing.

Replace the protective cover to keep the sticky surface clean until your next print.

STICK • PRINT • PEEL • REUSE!

WHAT IF MY BACKING IS TOO STICKY?

Your backing may initially have a strong grip.

If it feels too sticky:

  1. Place a clean, dry piece of scrap cotton onto the sticky surface.
  2. Gently peel it away.
  3. Repeat once or twice if necessary.

This reduces the initial tack slightly while maintaining enough adhesion to hold your fabric during printing.

IMPORTANT: Your fabric must still be firmly secured, especially around the edges and corners.

HOW TO CARE FOR YOUR REUSABLE BACKING

KEEP YOUR BACKING CLEAN AND PROTECTED FOR REPEATED USE!

  • REPLACE THE PROTECTIVE COVER after every use.
  • STORE FLAT in a cool, dry place away from direct sunlight.
  • KEEP FREE FROM DUST, LINT AND LOOSE FIBRES.
  • WATER ONLY IF NECESSARY – Rinse very briefly and gently with clean water.
  • AIR-DRY COMPLETELY before using again.
  • DO NOT SCRUB, SOAK OR USE SOAP OR DETERGENT!

The adhesive coating can wash off if scrubbed, soaked or cleaned with soap.

THE BACKING IS NOT WASHABLE – ONLY A QUICK, GENTLE WATER RINSE IF NECESSARY.

WHAT CAN YOU CREATE?

Use your reusable backing with suitable InkWeave™ pre-treated fabric for:

  • Personalised fabric book covers
  • Handmade journals and notebooks
  • Photo quilts and memory quilts
  • Custom quilt blocks
  • Fabric photographs
  • Children's artwork printed onto cotton
  • Decorative sewing panels
  • Appliqué designs
  • Personalised gifts and keepsakes

PRINT YOUR PHOTOS • PRINT YOUR ARTWORK • PRINT YOUR OWN DESIGNS!

DO I NEED A SPECIAL PRINTER?

NO SPECIAL FABRIC PRINTER REQUIRED!

You can print on fabric with your inkjet printer using a compatible home inkjet printer.

Your printer must be able to accommodate the combined thickness of the backing and attached fabric.

Always check your printer manufacturer's specifications before feeding fabric-backed sheets through your printer.

NOT SUITABLE FOR LASER OR DYE-SUBLIMATION PRINTERS.

IMPORTANT – FABRIC MUST BE PRE-TREATED

This reusable backing holds your fabric in place during printing.

IT DOES NOT PRE-TREAT YOUR FABRIC OR MAKE THE PRINT WASHABLE.

For washable fabric printing, use fabric that has been treated with InkWeave™ Inkjet Fabric Pretreatment, or purchase our ready-treated InkWeave™ cotton fabric.

YOUR FABRIC. YOUR PRINTER. YOUR DESIGNS.

Whether you're printing handmade book covers, personalised quilt blocks or treasured family photographs, InkWeave™ Reusable Printing Backing makes preparing fabric for home inkjet printing simple and convenient.

REUSABLE 10+ TIMES!

NO IRON-ON BACKING REQUIRED!

STICK • PRINT • PEEL • REUSE!

PRINT ON FABRIC WITH YOUR INKJET PRINTER!

InkWeave™ – Turn Your Ideas into Fabric.

Made in South Africa by DIY Book Binding Supplies.

www.diybookbindingsupplies.co.za

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Frequently Asked Questions

How do I attach the fabric securely?

Use completely dry fabric. Align one long edge first, lower the remaining fabric onto the sticky surface, then press it flat across the entire sheet, especially at the edges and corners. Do not print with bubbles, wrinkles or lifting edges.

What if the backing is too sticky?

Press clean, dry scrap fabric onto the sticky surface and gently peel it off several times. Stop when the grip is easier to handle but still holds the fabric securely.

Does the backing make an untreated fabric print washable?

No. It supports the fabric while printing. It does not replace fabric pretreatment. Use suitable pre-treated fabric when wash performance is needed.

When should I replace my reusable backing?

Reuse it only while it holds the fabric and all edges securely. Replace it if damaged or lifting. More than 10 uses have been achieved in our testing; useful life varies with handling, fabric and care.

Can I print with damp fabric or backing?

No. Both must be completely dry. If cleaning is necessary, follow the supplied care instructions: a brief gentle water-only rinse, no scrubbing, soaking, soap or detergent, then air-dry completely.

Does the backing stay inside my quilt or book cover?

No. Once the printed ink is dry, gently peel the fabric from this temporary printing carrier. Replace the protective cover and store it flat for reuse. Do not iron the sticky backing.

Which printers can I use?

Use only a compatible inkjet printer that accepts the combined fabric and carrier thickness. Check its media guidance and feed direction first. Not suitable for laser or dye-sublimation printers.

Printing Tips for Best Results

  1. Backing preparation: If the reusable backing is excessively sticky, press clean, dry scrap fabric onto it and peel it off several times to reduce stickiness. It must still hold all edges firmly.
  2. Loose threads: Remove loose threads before printing because they can cause printer jams.
  3. Correct fabric size: For an A4 printing setup, use fabric that is A4 or slightly smaller, with no fabric overhanging the carrier. Overhanging edges can drag through the printer and cause permanent black marks.
  4. Flat fabric: Press dry fabric completely flat against the carrier, removing bubbles, wrinkles and loose edges to help prevent black smudges. Start by aligning one long edge, then smooth across to the other side.
  5. Printer protection and maintenance: Check the printer manufacturer’s supported media thickness, feed direction and paper path. Feed one secure sheet at a time. Keep the printer clean and carry out regular maintenance.
  6. After printing: Let the ink dry before gently peeling the fabric away. Do not iron the sticky backing.
  7. Careful reuse: Once the ink is dry, peel the fabric off gently. Replace the protective cover and store the backing flat, clean and dry. Reuse only while it holds the fabric and edges securely; replace it if damaged or lifting. More than 10 uses have been achieved in testing, but useful life varies.

DIY Book Binding Supplies

Contact Us.

Email: info@diybookbindingsupplies.co.za

Address: 55 Dunville Road, Grosvenor, Bluff, Durban, South Africa, 4052

Sunday: Closed
Monday: 10:00am–17:00pm
Tuesday: 8:00am–17:00pm
Wednesday: 8:00am–17:00pm
Thursday: 8:00am–17:00pm
Friday: 8:00am–17:00pm
Saturday: Closed

“Made for bookbinders, artists, and lovers of handmade books.”

Have a query?

13 + 9 =

View cart0 View cart0
WhatsApp us